CLARAVUE is the best-in-class, hygienic solution for simple, accurate and fully radiolucent patient monitoring. Our selection of electrodes for the NICU / PICU are lightweight, disposable and prewired to eliminate motion artifact.

The only radio-invisible, pre-wired patient monitoring kit that has the highest quality trace for Electrophysiology and Cardiology. CLARAVUE includes disposable pre-wired and pre-positioned electrodes and patented reusable Bioactive trunk cable. CLARAVUE is quick to connect and can be worn after a procedure for up-to five days for continued patient monitoring in the hospital.

Download

Download

Anatomy of CLARAVUE in the NICU/PICU

Invisible Wires & Electrodes
No image obstruction under x-ray or fluoroscopy

CLARAVUE leadwires are invisible under x-ray and Fluoroscopy allowing you to focus on what's important during procedures in the NICU/PICU. The electrodes are made with carbon wires which do not show up under imaging equipment.

Quality Trace
Lower impedance, quicker signal, less noise

Pre-wired electrodes eliminate the need to snap leadwires onto electrodes. This helps to reduce motion artifact associated with movement of the leadwires on the electrode snaps. Patient kits are also repositionable and can be used for up to 5-days.

Quick Patient Hookup
Patented quick connection point, repositionable and comfortable

Our patented quick connection consolidates your standard 3 leadwire connections to one simple plug style connection. Reduce opportunities for error by simplifying your connections. Cables are lightweight and conforming increasing patient comfort.

Disposable - Hygienic
Single patient use, up to five day wear time

Each Patient Kit is completely disposable - making it the most hygienic solution possible. Our reusable Bioactive cables feature a metalloacid coating that produces antimicrobial effects as well.

Claravue

CLARAVUE Single Use Patient Kits
	Product #	Description	Per Kit	Kits/Box	Kits/Case	Gel Type
	4009832C	Pediatric Patient Kit - 3 Electrodes	3	40	480	Solid

CLARAVUE comes packaged in a dispenser case designed for easy storage and retrieval of product. Each patient kit is a single-use pack that contains all of the pre-wired electrodes necessary for any given procedure.

Prep

Standard protocol for skin prep applies.

Open

Open the single CLARAVUE patient kit. Remove inner bag. Unwind sets from the holder card.

Peel

Gently remove electrode sets from release liner by peeling away from thumb tab.

Apply

Adhere the RA and RL electrode positions to the patient. Continue to apply set A across the patient’s chest to the LA position and down to the LL position. Repeat with set B, applying the V positions from left to right. CLARAVUE is repositionable, allowing the freedom to rearrange on the patient as necessary. Note: Gently pull the wire from the ribbon cable to expand the overall size of the set(s).

Insert

While holding the male end of the adapter (clear clip) attached to set A, align with the blue, triangular indicator. Press firmly until lever snaps. Repeat with the blue clip attached to set B.

5 Day Wear

Ensure a good signal is achieved on the monitor. If a standard three lead trace is necessary, unplug set B from the adapter cable and remove the corresponding V positions from the patient. CLARAVUE’s various lead configurations enables total hospital standardization.

CLARAVUE’s unique blue trunk cables are coated with molybdenum trioxide (M0O3). The antimicrobial effects of this metalloacid material are demonstrated when compared to a non-coated cable.

In a recent study:

Metalloacid coated surfaces “exhibited significant antimicrobial activity relative to that of the control surfaces within two to six hours after contact with the micro organisms.”
This metalloacid material produces oxonium ions (H3O+), thus producing an acidic pH that is an effective antimicrobial.
Post-exposure to eight multi-drug resistant bacteria strains, bacterial counts are significantly lower after 6-24 hours of contact.
The total antimicrobial effectiveness is thought to be related to the H3O+ ion permeability of the cell membrane.
In combination with employing regular cleaning procedures, “coated device surfaces may provide a permanent means of minimizing microbial contamination between two cleaning procedures.”

Nathalie Tetault, H. G.-H.-M. (2012). Biocidial activity of metalloacid-coated surfaces against multidrug-resistant microoganisms. Antimicrobial Resistance and Infection Control, 1-35.

CLARAVUE Literature

Anatomy of CLARAVUE in the NICU/PICU

Invisible Wires & Electrodes
No image obstruction under x-ray or fluoroscopy

Quality Trace
Lower impedance, quicker signal, less noise

Quick Patient Hookup
Patented quick connection point, repositionable and comfortable

Disposable - Hygienic
Single patient use, up to five day wear time